 |
|
 |
|
 |
| |
Miscellaneous Functions
- HDRterm50: (from Dynamic Engineering)
- HDRterm50 is a ribbon cable to 50 position screw terminal adapter. 50 pin header with ejector latches. 50 position side entry screw terminal strip. DIN rails for standard mounting.
- IP PULSE: (from Dynamic Engineering)
- 4 independent programmable pulse generators
IP Module Compatible
The IndustryPack compatible IP-Pulse features 4 independent programmable pulse generators. The outputs can be configured to be TTL /CMOS or RS422/485 compatible in several combinations. A real space saver for systems with both types of IO. Perfect for your embedded control applications.
- IP-488: (from SBS Technologies)
- IEEE-488 Interface. Talker, listener, controller
- IP-CF: (from Dynamic Engineering)
- Add solid state data storage to your system with IP-CF. The IndustryPack compatible IP-CF design converts between the IP Module bus and the IDE bus used for FLASH memory modules and other PC Card compatible designs. The IP-CF acts as a bridge between the IP bus and your PC Card hardware. The IP-CF comes standard with a 64 Mb CompactFLASH(tm) card.
- IP-Crypto: (from Dynamic Engineering)
- Use the IP Crypto for your control, avionics and robotics applications. The IP Crypto is a special version of the IP-Parallel-HV. The basic design features are retained and an interface to a KYK-13 is provided. The KYK-13 interface uses the 6.5V reference output, a transfer request output, and 3 inputs for clock, data and switch. The outputs for the general purpose section are reduced to 23 in number. The inputs are all available through the filter or after processing by the KYK-13 interface.
The standard IP Parallel HV is a High Voltage IP Compatible card with 48 programmable IO. 40 mA sink. Open collector interface. Interrupt generator on each input channel. filtered or direct input. The IndustryPack compatible IP-Parallel-HV design can handle up to 30V external signals. The standard card configuration is a 6.5V reference and the ability to supply an external reference. Other voltages are available.
Perfect for your embedded control.
- IP-Driver 40: (from SBS Technologies)
- 40 high current, open drain, low-side FET drivers. 1 Amp/ channel
- IP-Opto Driver: (from SBS Technologies)
- Optically Isolated High-Side Switches, 16 channels optically isolated high-side drivers for relays, 'valves, lamps, outputs 1A at 48VDC.
- IP-OptoISO-16: (from Dynamic Engineering)
- 16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 is available now
- IP-Parallel-HV: (from Dynamic Engineering)
- Use the IP Parallel HV for your control, avionics and robotics applications. <BR>High Voltage IP Compatible card with 48 programmable IO. 40 mA sink. Open collector interface. Interrupt generator on each input channel. filtered or direct input. The IndustryPack compatible IP-Parallel-HV design can handle up to 30V external signals. The standard card configuration is a 6.5V reference and the ability to supply an external reference. Other voltages are available.
Use the IP Parallel HV for your control, avionics and robotics applications.
Perfect for your embedded control applications.
- IP-RTD: (from SBS Technologies)
- Temperature RTD Input, Precision signal conditioner for 3 or 4-wire 100˝ RTDs, 12 RTD channels supported, -200C to 850C.
- IP-Thermocouple: (from SBS Technologies)
- Temperature Thermocouple Input, 24 CH high-res Thermocouple input, 16-bit A/D, 1kHz scan rate, Iso-thermal block.
- IP-Xilinx-422: (from SBS Technologies)
- Differential EIA-422- Level Digital I/O. Up to 24 lines. One empty Xilinx 3042 chip for custom digital interface
- IP-Xilinx-Buf: (from SBS Technologies)
- Buffered TTL w /64mA sink Digital I/O. Up to 24 lines w/ +15/ -5V input. One empty Xilinx 3041 chip for custom digital interface
- IP-Xilinx-ESD: (from SBS Technologies)
- TTL Level Digital I/O. Up to 25 lines w/ESD protection circuitry. One empty Xilinx 3042 chip for custom digital interface
- IP-Xilinx-XX-422: (from SBS Technologies)
- Differential EIA-422 Level Digital I/O. Up to 24 lines. 2 empty, Xilinx 3042 chips for custom digital interface
- IP-Xilinx-XX-Buf: (from SBS Technologies)
- Buffered TTL w/64mA sink Digital I/O. Up to 24 lines w/+ 15/ 5V input. 2 empty Xilinx 3041chips for custom digital interface
- IP-Xilinx-XX-ESD: (from SBS Technologies)
- TTL Level Digital I/O, Up to 25 lines w/ESD protection circuitry. 2 empty Xilinx 3042 chips for custom digital interface
- IP202S Slewable Function Generator: (from C&H Technologies)
- Function Generator, Slewable, sine, square, triangle, sawtooth, 0 - 1MHz in four ranges, 0 - 10Vpp, -5V to +5 DC offset, sweep modes: fixed, single ramp, single cycle, and continuous cycle, frequency, amplitude, and dc offset sweeping, duty cycle control.
|
|
|
|
|
|
