 |
| |
Motion Control
- IP-68332: (from SBS Technologies)
- Intelligent I/O control. 68332/16 MHz. 16CH programmable timer/counter. 8 2 CH Queued Serial Module interface. Up to 90K x l6 SRAM. BDM debug support
- IP-Encoder-6: (from SBS Technologies)
- 6 channel encoder input module, 18 bit, DC to 1.5 MHz.
- IP-OptoISO-16: (from Dynamic Engineering)
- 16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 is available now http://www.dyneng.com/ip_optoiso_16.html from Dynamic Engineering.
Features:
∑ 8 and 32 MHz operation
∑ 16 independent optically isolated outputs
∑ 0-60V @1.5A
∑ Two counter timers - enhanced MC68230 capability
∑ Programmable waveform output
∑ Glitch-free initialization safe outputs
∑ Room for custom requirements within FPGA.
∑ DIODE protected Outputs
- IP-PWI: (from SBS Technologies)
- Pulse Width Input Measurement, 3 channel pulse-width input, 8.3ns resolution, RS422, 18-bit depth, use with Temposonics transducers.
- IP-Quadrature: (from SBS Technologies)
- Encoder input, 4 24-bit counter/timer channels, DC to 2.5 MHz, Interrupts, On-the-fly, up, down, quadrature.
- IP-Servo: (from SBS Technologies)
- Servo controller, 2 channel, EIA-485 or TTL for feedback, 0-5V or +/- 5V 12-bit D/A outputs, uses LM628, 32-bit position/acceleration/velocity register.
- IP-Stepper: (from SBS Technologies)
- Stepper controller, 2 channel, EIA-485 or 20 mA current loop interface, user configurate for TTL. 24-bit preloadable up/down counter, to 240,000 pps. Uses PCL-240 MK IC.
- IP-Synchro: (from SBS Technologies)
- Synchro, Resolver, or LVDT input. 2 channel. Supports 11.8V and 90V input. Supports 60Hz, 400Hz, 2250Hz, l0kHz input. 8 arc min position resolution. 16-bit digital output
- TIP102-10: (from TEWS TECHNOLGIES GmbH)
- High precision motion controller, 24 bit counter (1.2MHz), 16bit D/A converter, 12 bit A/D converter, 4 inputs , 3 outputs; Requires transition module TIP102-TM-1x; Operating Temperature 0°C to +70°C
- TIP102-20: (from TEWS TECHNOLGIES GmbH)
- Two axes incremental high precision motion controller, 24 bit counter (1.2MHz), 16bit D/A converter, 12 bit A/D converter, 4 inputs , 3 outputs; Requires transition module TIP102-TM-1x; Operating Temperature 0°C to +70°C
- TIP111-10: (from TEWS TECHNOLGIES GmbH)
- High precision motion controller; 32 bit synchronous serial encoder interface (SSI); 16bit D/A converter, 12 bit A/D converter, 4 inputs , 3 outputs; Requires transition module TIP111-TM -1x; Operating Temperature 0°C to +70°C
- TIP111-20: (from TEWS TECHNOLGIES GmbH)
- Two axes absolute (SSI) high precision motion controller; 32 bit synchronous serial encoder interface (SSI); 16bit D/A converter, 12 bit A/D converter, 4 inputs , 3 outputs; Requires transition module TIP111-TM -2x; Operating Temperature 0°C to +70°C
- TIP114-10: (from TEWS TECHNOLGIES GmbH)
- 10 independent absolute encoder ( SSI ) interfaces, programmable clock rate from 1 µs to 15 µs and data bits from 1 to 32 bit; Binary or Gray code; even,odd or no parity; data inputs galvanically isolated
- TIP115-10: (from TEWS TECHNOLGIES GmbH)
- 5 channel synchronous serial interface (SSI) with two modes: Standard SSI Interface Controller / 'Listen Only' mode; Programmable clock rate from 1µs to 15µs and data bits from 1 bit to 32 bit; Binary or Cray Code; Even, odd or no parity; EIA-422 encoder inputs galvanically isolated by high speed optocouplers; Operating temperature 0°C to +70°C
- TIP116-10: (from TEWS TECHNOLGIES GmbH)
- 4 channel Quadrature / General Purpose Counter; Each 4 channel Quadrature / General Purpose Counter; Each 32bit counter with 32bit preload register, 32bit comparator register, 32bit latched output register, Up/down, direction or quadrature count, Divide-by-N or Single Cycle counting mode and programmable control input with 4 additional control modes; Vectored interrupt; DC to 4MHz count frequency; Inputs TTL/RS422 compatible; 1 general purpose RS422 I/O; Interval timer; Operating temperature -40°C to +85°C
- TIP120-10: (from TEWS TECHNOLGIES GmbH)
- Low cost two axes motion controller based on two LM628; 12 bit D/A converter; 32 bit position, velocity and acceleration register per axis; 3 inputs and 1 output galvanically isolated per axis; No transition module required; Operating Temperature 0°C to +70°C
- TIP120-11: (from TEWS TECHNOLGIES GmbH)
- Low cost one axis motion controller based on LM628; 12 bit D/A converter; 32 bit position, velocity and acceleration register; 3 inputs and 1 output galvanically isolated; No transition module required; Operating Temperature 0°C to +70°C
- TIP120-20: (from TEWS TECHNOLGIES GmbH)
- Low cost two axes motion controller based on two LM629; 8 bit PWM output; 32 bit position, velocity and acceleration register per axis; 3 inputs and 1 output galvanically isolated per axis; No transition module required; Operating Temperature 0°C to +70°C
- TIP120-21: (from TEWS TECHNOLGIES GmbH)
- Low cost one axes motion controller based on two LM629; 8 bit PWM output; 32 bit position, velocity and acceleration register per axis; 3 inputs and 1 output galvanically isolated per axis; No transition module required; Operating Temperature 0°C to +70°C
- TIP120-30: (from TEWS TECHNOLGIES GmbH)
- Low cost two axes motion controller based on one LM629; 8 bit PWM output; and one LM628 with 12 bit D/A converter; 32 bit position, velocity and acceleration register; 3 inputs and 1 output galvanically isolated; No transition module required; Operating Temperature 0°C to +70°C
- TIP150-30: (from TEWS TECHNOLGIES GmbH)
- One channel tracking Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit; Converter accuracy 4 arcmin + 1 LSB; Bandwidth adjustable; Analog velocity output, built-in-test-output; Operating Temperature 0°C to +70°C
- TIP150-31: (from TEWS TECHNOLGIES GmbH)
- One channel tracking Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit; Converter accuracy 2 arcmin + 1 LSB; Bandwidth adjustable; Analog velocity output, built-in-test-output; Operating Temperature 0°C to +70°C
- TIP150-40: (from TEWS TECHNOLGIES GmbH)
- Two channel tracking Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit; Converter accuracy 4 arcmin + 1 LSB; Bandwidth adjustable; Analog velocity output, built-in-test-output; Operating Temperature 0°C to +70°C
- TIP150-41: (from TEWS TECHNOLGIES GmbH)
- Two channel tracking Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit; Converter accuracy 2 arcmin + 1 LSB; Bandwidth adjustable; Analog velocity output, built-in-test-output; Operating Temperature 0°C to +70°C
|
 |
|
|
|
|
