Multi-Function

Home

Vendors

Products

Multi-Function

IP-D1553-M: (from Condor Engineering)
Multi-function Dual Channel MIL-STD-1553A/B IP Module. The high-density, multi-function, mezzanine board is a cross-platform solution that leverages powerful functionality with an easy-to-use programming interface for either one or two 1553 channels in a single-wide IP slot. Each channel can be configured independently to operate simultaneously as a Bus Controller, up to 31 Remote Terminals, and as a Bus Monitor. Standard features include IRIG/GPS synchronization capability, aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. Up to four modules can be mounted on PCI, CompactPCI, VME or VXI carriers resulting in up to eight 1553 channels in a single system slot. Extended operating temperature optional.

IP-D1553-S: (from Condor Engineering)
Single-function Dual Channel MIL-STD-1553A/B IP Module. Each channel on these modules operates independently as either a BC, or up to 31 RTs, or as a Bus Monitor. Standard features include IRIG/GPS synchronization capability, aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. Up to four modules can be mounted on PCI, CompactPCI, VME or VXI carriers resulting in up to eight 1553 channels in a single system slot. Extended temp available.

IP-OptoISO-16: (from Dynamic Engineering)
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 is available now http://www.dyneng.com/ip_optoiso_16.html from Dynamic Engineering.

QPMC-1553-M: (from Condor Engineering)
QPMC-1553 offers 1, 2 or 4 multi-function 1553 interfaces that can operate simultaneously as a BC, up to 31 RTs and as a BM.Front panel or rear (P14) I/O available.IRIG/GPS synchronization capability.48-bit, microsecond time-tagging. Complete message programmability. Flexible message status/interrupt generation. I/O triggering and error injection/detection. Built-in-test. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional. 

QPMC-1553-S: (from Condor Engineering)
Single-function MIL-STD-1553A/B on the PMC bus. Interfaces function as either a Bus Controller or 31 Remote Terminals or Bus Monitor. Standard features include IRIG/GPS synchronization capability, real-time bus playback (with ability to edit out RTs), aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. The Bus Monitor mode provides 100% bus monitoring of a fully loaded 1553 bus. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.: Multi-function Dual Channel MIL-STD-1553A/B IP Module. The high-density, multi-function, mezzanine board is a cross-platform solution that leverages powerful functionality with an easy-to-use programming interface for either one or two 1553 channels in a single-wide IP slot. Each channel can be configured independently to operate simultaneously as a Bus Controller, up to 31 Remote Terminals, and as a Bus Monitor. Standard features include IRIG/GPS synchronization capability, aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. Up to four modules can be mounted on PCI, CompactPCI, VME or VXI carriers resulting in up to eight 1553 channels in a single system slot. Extended operating temperature optional.
IP-D1553-S: (from Condor Engineering)
Single-function Dual Channel MIL-STD-1553A/B IP Module. Each channel on these modules operates independently as either a BC, or up to 31 RTs, or as a Bus Monitor. Standard features include IRIG/GPS synchronization capability, aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. Up to four modules can be mounted on PCI, CompactPCI, VME or VXI carriers resulting in up to eight 1553 channels in a single system slot. Extended temp available.

IP-OptoISO-16: (from Dynamic Engineering)
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 is available now http://www.dyneng.com/ip_optoiso_16.html from Dynamic Engineering.

QPMC-1553-M: (from Condor Engineering)
QPMC-1553 offers 1, 2 or 4 multi-function 1553 interfaces that can operate simultaneously as a BC, up to 31 RTs and as a BM.Front panel or rear (P14) I/O available.IRIG/GPS synchronization capability.48-bit, microsecond time-tagging. Complete message programmability. Flexible message status/interrupt generation. I/O triggering and error injection/detection. Built-in-test. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional. 

QPMC-1553-S: (from Condor Engineering)
Single-function MIL-STD-1553A/B on the PMC bus. Interfaces function as either a Bus Controller or 31 Remote Terminals or Bus Monitor. Standard features include IRIG/GPS synchronization capability, real-time bus playback (with ability to edit out RTs), aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. The Bus Monitor mode provides 100% bus monitoring of a fully loaded 1553 bus. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.: Single-function Dual Channel MIL-STD-1553A/B IP Module. Each channel on these modules operates independently as either a BC, or up to 31 RTs, or as a Bus Monitor. Standard features include IRIG/GPS synchronization capability, aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. Up to four modules can be mounted on PCI, CompactPCI, VME or VXI carriers resulting in up to eight 1553 channels in a single system slot. Extended temp available.
IP-OptoISO-16: (from Dynamic Engineering)
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 is available now http://www.dyneng.com/ip_optoiso_16.html from Dynamic Engineering.

QPMC-1553-M: (from Condor Engineering)
QPMC-1553 offers 1, 2 or 4 multi-function 1553 interfaces that can operate simultaneously as a BC, up to 31 RTs and as a BM.Front panel or rear (P14) I/O available.IRIG/GPS synchronization capability.48-bit, microsecond time-tagging. Complete message programmability. Flexible message status/interrupt generation. I/O triggering and error injection/detection. Built-in-test. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional. 

QPMC-1553-S: (from Condor Engineering)
Single-function MIL-STD-1553A/B on the PMC bus. Interfaces function as either a Bus Controller or 31 Remote Terminals or Bus Monitor. Standard features include IRIG/GPS synchronization capability, real-time bus playback (with ability to edit out RTs), aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. The Bus Monitor mode provides 100% bus monitoring of a fully loaded 1553 bus. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.: IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 is available now http://www.dyneng.com/ip_optoiso_16.html from Dynamic Engineering.
QPMC-1553-M: (from Condor Engineering)
QPMC-1553 offers 1, 2 or 4 multi-function 1553 interfaces that can operate simultaneously as a BC, up to 31 RTs and as a BM.Front panel or rear (P14) I/O available.IRIG/GPS synchronization capability.48-bit, microsecond time-tagging. Complete message programmability. Flexible message status/interrupt generation. I/O triggering and error injection/detection. Built-in-test. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional. 

QPMC-1553-S: (from Condor Engineering)
Single-function MIL-STD-1553A/B on the PMC bus. Interfaces function as either a Bus Controller or 31 Remote Terminals or Bus Monitor. Standard features include IRIG/GPS synchronization capability, real-time bus playback (with ability to edit out RTs), aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. The Bus Monitor mode provides 100% bus monitoring of a fully loaded 1553 bus. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.: QPMC-1553 offers 1, 2 or 4 multi-function 1553 interfaces that can operate simultaneously as a BC, up to 31 RTs and as a BM.Front panel or rear (P14) I/O available.IRIG/GPS synchronization capability.48-bit, microsecond time-tagging. Complete message programmability. Flexible message status/interrupt generation. I/O triggering and error injection/detection. Built-in-test. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.
QPMC-1553-S: (from Condor Engineering)
Single-function MIL-STD-1553A/B on the PMC bus. Interfaces function as either a Bus Controller or 31 Remote Terminals or Bus Monitor. Standard features include IRIG/GPS synchronization capability, real-time bus playback (with ability to edit out RTs), aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. The Bus Monitor mode provides 100% bus monitoring of a fully loaded 1553 bus. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.: Single-function MIL-STD-1553A/B on the PMC bus. Interfaces function as either a Bus Controller or 31 Remote Terminals or Bus Monitor. Standard features include IRIG/GPS synchronization capability, real-time bus playback (with ability to edit out RTs), aperiodic message insertion, error injection/detection, conditional BC branching, 48-bit timetags and "Oneshot" BC operation. The Bus Monitor mode provides 100% bus monitoring of a fully loaded 1553 bus. 1 MB RAM per channel. Transition cabling to 1553 cable jacks. Conductive cooling optional.