Telecommunications Modules

Home

Vendors

Products

Telecommunications Modules

PMC Spacewire: (from Dynamic Engineering)
Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.

ADM-XP: (from Alpha Data)
Based on the largest Virtex-II Pro Platform FPGAs from Xilinx, the ADM-XP provides a powerful and simple solution for prototyping and embedding. Features include 2VP100, PCI66/64/PCI-X, 128MB DDR SDRAM, 32MB DDR SSRAM, 16MB Flash, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric. Interfaces include CameraLink, Ethernet, RapidIO, ADC, DAC, LVDS and FPDP.

ADM-XPL: (from Alpha Data)
Based on the Virtex-II Pro Platform FPGA from Xilinx, the XPL provides a powerful and simple solution for prototyping and embedding. Features include PCI66/64, DDR SDRAM, ZBT, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric

ADM-XRC: (from Alpha Data)
High performance FPGA based PMC featuring the largest Xilinx Virtex devices. Leverages rapid hardware development or integration of a wide range of telecoms IP Cores including encryption and compression. Support for Virtex/E/EM/II FPGAs from 400K to 10,000K gates, with 4 independent banks of 256k/512k x 36 SSRAM, 2 DMA channels, programmable clocks, flash boot memory, front and rear panel IO connectors and SDK for WinNT, Win2000, linux and VxWorks with example code.

ADM-XRC-II: (from Alpha Data)
High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MBytes ZBT SSRAM, programmable clocks, flash boot option and support for Win2000, VxWorks and linux.

CCII 8-Channel E1/T1 Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.
ADM-XP: (from Alpha Data)
Based on the largest Virtex-II Pro Platform FPGAs from Xilinx, the ADM-XP provides a powerful and simple solution for prototyping and embedding. Features include 2VP100, PCI66/64/PCI-X, 128MB DDR SDRAM, 32MB DDR SSRAM, 16MB Flash, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric. Interfaces include CameraLink, Ethernet, RapidIO, ADC, DAC, LVDS and FPDP.

ADM-XPL: (from Alpha Data)
Based on the Virtex-II Pro Platform FPGA from Xilinx, the XPL provides a powerful and simple solution for prototyping and embedding. Features include PCI66/64, DDR SDRAM, ZBT, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric

ADM-XRC: (from Alpha Data)
High performance FPGA based PMC featuring the largest Xilinx Virtex devices. Leverages rapid hardware development or integration of a wide range of telecoms IP Cores including encryption and compression. Support for Virtex/E/EM/II FPGAs from 400K to 10,000K gates, with 4 independent banks of 256k/512k x 36 SSRAM, 2 DMA channels, programmable clocks, flash boot memory, front and rear panel IO connectors and SDK for WinNT, Win2000, linux and VxWorks with example code.

ADM-XRC-II: (from Alpha Data)
High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MBytes ZBT SSRAM, programmable clocks, flash boot option and support for Win2000, VxWorks and linux.

CCII 8-Channel E1/T1 Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Based on the largest Virtex-II Pro Platform FPGAs from Xilinx, the ADM-XP provides a powerful and simple solution for prototyping and embedding. Features include 2VP100, PCI66/64/PCI-X, 128MB DDR SDRAM, 32MB DDR SSRAM, 16MB Flash, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric. Interfaces include CameraLink, Ethernet, RapidIO, ADC, DAC, LVDS and FPDP.
ADM-XPL: (from Alpha Data)
Based on the Virtex-II Pro Platform FPGA from Xilinx, the XPL provides a powerful and simple solution for prototyping and embedding. Features include PCI66/64, DDR SDRAM, ZBT, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric

ADM-XRC: (from Alpha Data)
High performance FPGA based PMC featuring the largest Xilinx Virtex devices. Leverages rapid hardware development or integration of a wide range of telecoms IP Cores including encryption and compression. Support for Virtex/E/EM/II FPGAs from 400K to 10,000K gates, with 4 independent banks of 256k/512k x 36 SSRAM, 2 DMA channels, programmable clocks, flash boot memory, front and rear panel IO connectors and SDK for WinNT, Win2000, linux and VxWorks with example code.

ADM-XRC-II: (from Alpha Data)
High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MBytes ZBT SSRAM, programmable clocks, flash boot option and support for Win2000, VxWorks and linux.

CCII 8-Channel E1/T1 Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Based on the Virtex-II Pro Platform FPGA from Xilinx, the XPL provides a powerful and simple solution for prototyping and embedding. Features include PCI66/64, DDR SDRAM, ZBT, high desity adaptable I/O and Software Development Kit with templates for embedded PowerPC and FPGA fabric
ADM-XRC: (from Alpha Data)
High performance FPGA based PMC featuring the largest Xilinx Virtex devices. Leverages rapid hardware development or integration of a wide range of telecoms IP Cores including encryption and compression. Support for Virtex/E/EM/II FPGAs from 400K to 10,000K gates, with 4 independent banks of 256k/512k x 36 SSRAM, 2 DMA channels, programmable clocks, flash boot memory, front and rear panel IO connectors and SDK for WinNT, Win2000, linux and VxWorks with example code.

ADM-XRC-II: (from Alpha Data)
High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MBytes ZBT SSRAM, programmable clocks, flash boot option and support for Win2000, VxWorks and linux.

CCII 8-Channel E1/T1 Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: High performance FPGA based PMC featuring the largest Xilinx Virtex devices. Leverages rapid hardware development or integration of a wide range of telecoms IP Cores including encryption and compression. Support for Virtex/E/EM/II FPGAs from 400K to 10,000K gates, with 4 independent banks of 256k/512k x 36 SSRAM, 2 DMA channels, programmable clocks, flash boot memory, front and rear panel IO connectors and SDK for WinNT, Win2000, linux and VxWorks with example code.
ADM-XRC-II: (from Alpha Data)
High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MBytes ZBT SSRAM, programmable clocks, flash boot option and support for Win2000, VxWorks and linux.

CCII 8-Channel E1/T1 Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: High performance Virtex-II based PMC card. Featuring Virtex-II devices up to 10 million gates, 66MHz 64-bit PCI bus, over 200 user I/O connections, battery backed encryption keys, up to 12MBytes ZBT SSRAM, programmable clocks, flash boot option and support for Win2000, VxWorks and linux.
CCII 8-Channel E1/T1 Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Intelligent I/O adapter with onboard processing using a Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering eight E1 (or T1) telecommunications channels, as well as two high-speed serial I/O (>10 Mbps) and two UART serial I/O channels.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.
CCII Universal Telecomms PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.

DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Intelligent I/O adapter with onboard processing using a single or dual Motorola PowerQUICC II Integrated PowerPC Microprocessor as communication controller and offering various combinations of E1/T1, E3/T3, Fast Ethernet, ATM and serial I/O.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Exact functionality can be tailored to meet customer requirements with I/O channels only being limited by the number of available PMC connector pins.

Commercial, industrial and ruggedised adapters offer I/O over either twisted pair or optical fibre media; the conduction-cooled version offers I/O over twisted pair media only.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks and Linux operating systems as standard; others optional.
DE520 PMC: (from Force Computers )
Fast EtherWORKS/PMC Adapter

MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Fast EtherWORKS/PMC Adapter
MPMC8260: (from Motorola Inc., Embedded Communications Computing)
MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.

MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: MPC8260 PowerQUICC II PCI Mezzanine Card. 64MB SDRAM, 8MB FLASH, 256KB SRAM, 32 or 64 bit data, up to 66 MHz, PCI 2.2 compliant interface, single-wide PMC factor, IEEE P1386.1 (PMC) compliant, 4 T1 or E1 rear I/Os available over PMC connector P14 or dual T1 or E1 through front-panel RJ 45 connectors.
MPMC860: (from Motorola Inc., Embedded Communications Computing)
MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.

NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: MPC860 PowerPC quad integrated communications controller. 16MB DRAM, 2MB FLASH, 32 bit 33MHz PCI 2.1 compliant interfaces, single wide PMC form factor, IEEE P1386.1 PMC compliant, Dual E1 interface to carrier, interfaces with PIM-0100.
NPMC-4E1: (from N.A.T. GmbH)
The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-4E1 is a highly efficient low-cost PMC module with four E1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The E1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.
NPMC-4T1: (from N.A.T. GmbH)
The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.

NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-T1 is a highly efficient low-cost PMC module with four T1 interfaces and access to the standard time division multiplex (TDM) SCSA bus. The T1 framers as well as the SCbus controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems.
NPMC-8260-4E1/T1: (from N.A.T. GmbH)
The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.

NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-8260-4E1/T1 is a high performance PMC module, based on the Motorola versatile MPC8260 "PowerQuicc II" processor. It supports 4 E1/T1 ports as well as a 100BaseT Ethernet port using standard connectors on the front panel. Equipped with an H.110 TDM bus controller the NPMC-8260-4E1/T1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoIP environments.
NPMC-8266-OC3: (from N.A.T. GmbH)
N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.

NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: N.A.T. presents the telecommunication interface board NPMC-8266-OC3 - a generic platform for any implementation switching between the classic TDM (Time Division Mulitplex) streams and the new generation of packetized data applications. The NPMC-8266-OC3 is a PMC module based on the powerful Motorola MPC8266 "PowerQUICCII" processor.
NPMC-8280-4E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.

NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-8280-4E1/T1/J1 is a high-performance PMC module, based on the Motorola versatile MPC8280 �PowerQuicc II� processor. It supports four E1/T1/J1 ports, a 100BaseT Ethernet port using standard RJ45 connector and a RS232 on a SUBD connector on the front panel. Equipped with an H.110 TDM bus controller and due to the CPU providing up to 855 MIPS the NPMC-8280-4E1/T1/J1 is optimized for use in sophisticated telecom applications in SS7, ISDN, ATM or VoP environments.
NPMC-860-2E1: (from N.A.T. GmbH)
The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-2E1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two E1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the E1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.
NPMC-860-2T1: (from N.A.T. GmbH)
The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.

NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-2T1 is an intelligent telecommunication interface board equipped with a Motorola MPC860 "PowerQUICC I" CPU, two T1 interfaces. The onboard SCbus controller provides an easy means for user data being interfaced to the T1 timeslots. Using the CPU's TDM controller data can also be inserted via the PCI bus.
NPMC-860-4S0: (from N.A.T. GmbH)
The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.

NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-4S0 is a versatile and highly integrated microprocessor and peripheral combination that can be used in a variety of telecommunication applications. The four ISDN basic rate interfaces for connection to the S/T reference point can be configured to run independently in either User or Network mode.
NPMC-860-CPU: (from N.A.T. GmbH)
The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-CPU is an intelligent PMC module on the basis of the Motorola MPC860, providing extra processor resources in PMC based systems. The RISC based communication processor provides flexible I/O such as Ethernet, HDLC, UART and many more. Access to 1x 10BaseT, 2x RS232 and 1x Centronics is available at the front panel.
NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access to various standard connectivity is available.
NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.
NPMC-8E1/T1/J1: (from N.A.T. GmbH)
The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.

NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-8E1/T1/J1 is a highly efficient low-cost PMC module offering eight E1, T1 or J1 interfaces as well as access to the standard time division multiplex (TDM) H.110/SCSA bus. The module can be plugged onto any carrier board supporting PMC standards. The line interfaces as well as the H.110 controller can be initialized via the PCI bus, offering the possibility of assembling highly scalable, cost effective systems. The NPMC-8E1/T1/J1 is targeted at telecom applications in SS7, ISDN, VoIP or 3G/3.5G mobile environments and is intended to be used with a PMC carrier board, such as the N.A.T. NVTP1001, then providing a very cost-effective and intelligent solution.
NPMC-DSP: (from N.A.T. GmbH)
The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.

NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-DSP is a multi-purpose telecommunication resource board in PMC (PCI Mezzanine Card) form factor based on the powerfull Analog Devices Blackfin DSP processors. The NPMC-DSP is targeted at applications in telecom environments with extensive need for voice or data computation. The module is designed to process standard telecom algorithms like voice/data compression/decompression or DTMF detection/generation. Being capable of handling individual timeslots within a TDM stream selected from the H.110 backplane the NPMC-DSP is an ideal solution for any voice/data application in any signalling or VoP solution such as in ISDN, SS7, ATM, VoIP or 3G environments.
NPMC-EXT64: (from N.A.T. GmbH)
The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.

NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-EXT64 is a passive 64Bit PMC extender, providing a versatile means for development in a PMC environment. The NPMC-EXT64 allows access to all signals of the PMC bus, including the I/O signals, especially for access by a logic analyzer or a digital oszilloscope.
NPMC-STM1: (from N.A.T. GmbH)
The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.

NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-STM1 is a telecommunications interface board in PMC (PCI Mezzanine Card) form factor. The NPMC-STM1 is targeted at telecom applications dealing with SDH (Synchronous Digital Hirachie), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. Being equipped with an add/drop multiplexer/demultiplexer chipset the NPMC-STM1 is an ideal single board platform to interface between the frame oriented STM-1/SDH networks and classic TDM (Time Division Multiplex) standards as E1/T1/J1. Possible applications are i.e. add/drop multiplexer or terminal mulitplexer.
NPMC-STM4: (from N.A.T. GmbH)
The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-STM4 is a telecommunications interface board in PMC form factor. It is targeted at telecom applications dealing with SDH (Synchronous Digital Hierarchy), such as SS7, ISDN or 3G/3.5G mobile applications in optical OC-3/STM-1 and SONET environments. The module operates at a data rate of 622 MBit/sec and is conformant to the optical interface standard OC-12.
- OC-12/STM-4 interface for SONET/SDH monitoring and termination applications - Add/Drop multiplexer for 252 E1 or 336 T1 channels - E1/T1 channel extration to H.110 backplane - PICMG 2.15 PTMC configuration 2 - Channel extraction on DS0 basis
NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 �PowerQuicc II� processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.
PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.
PMC-8260: (from SBS Technologies)
Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.

PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Intelligent Quad E1/T1 PMC Module based on the MPC8260 processor. Four E1 or T1 connections on front panel using RJ-45. 16MB DRAM. 4MB Flash. SCBus via rear-panel (P4). Serial port for status monitoring. VxWorks BSP and development kit available.
PMC-8260 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: FORCE StackWare Frame Relay binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860
PMC-8260 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: FORCE StackWare LAPD binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 256 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860
PMC-8260 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860

PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: FORCE StackWare MTP-2 binary S/W package 'Release 4' for PMC-8260/DS1 or PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 2.0 and SPARC/Solaris 2.6, 7 and 8 host, up to 64 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with either 1 PMC-8260 or 1 PMC/860
PMC-8260/DS1-H110-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750

PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PowerQUICC-II based PMC module, 200 MHz, two software selectabel E1/T1/J1 i/f on PMC front panel, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750
PMC-8260/DS1-H110-R: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1

PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PowerQUICC-II based PMC module, 200 MHz, four software selectabel E1/T1/J1 i/f on PMC User I/O, H.110 bus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected CPCI carriers like FORCE PPC CPCI-6750 with octal E1/T1/J1 Rear Transition Board ACC/RTB-8260/DS1
PMC-8260/DS1-N-F/200-32-1: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels

PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels
PMC-8260/DS1-SC-F: (from Force Computers )
PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110

PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PowerQUICC-II based PMC module, 200 MHz, two software selectable E1/T1/J1 i/f on PMC front panel, SCbus i/f, 32 MB SDRAM, 1 MB SRAM, 2 MB User Flash, up to 64 MTP-1 or 256 HDLC channels, for selected VME/CPCI carriers like FORCE VME PPC CPU-6603/4 (lower slot) or non-intellignet PMC carrier CPCI MFIO-110
PMC/860 StackWare(TM) Frame Relay: (from Force Computers )
FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: FORCE StackWare Frame Relay binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 Frame Relay channels, compliant with Q.922 Data Link, LAPF, FR Control Protocol according to ANSI, ITU-T and Frame Relay Forum, PVC (Permanent Virtual Circuits), LMI (Layer Management Interface); incl. RTU license for use with 1 PMC/860
PMC/860 StackWare(TM) LAPD: (from Force Computers )
FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860

PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: FORCE StackWare LAPD binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 64 LAPD channels, compliant with ITU-T, Q.920, Q.921 Recommendation, Bellcore SR-NWT-001959, ETSI, ETS 300 102-1, ETS 300 102-2, ETS 300007, ETS 300 104; incl. RTU license for use with 1 PMC/860
PMC/860 StackWare(TM) MTP-2: (from Force Computers )
FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860

PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: FORCE StackWare MTP-2 binary S/W package 'Release 3' for PMC/860 on CD-ROM, incl. control, configuration and test functions, serial port and PCI i/f support for PowerCore/VxWorks Tornado 1.0.1 and SPARC/Solaris 2.6 and 7 host, up to 4 MTP-1 channels, compliant with ITU-T, Q.701, Q.703, Q.781, ANSI T1.111.3 and Trillium API compliant drivers (for MTP-3 use on host); incl. RTU license for use with 1 PMC/860
PMC/860-SIO/66-2: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.

PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PowerQUICC based PMC module, 66 MHz, 2 serial interfaces (full signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21 (ISO4903, Dsub-15 male/female), X.21bis (X.21bis DTE ISO2110, Dsub-25 male/female), V.35 (ISO2593, 34 pole male/female), V36 (ISO4902, Dsub-37 male/female); cable sencing and auto configuring serial driver logic.
PMC/860-SIO/66-4: (from Force Computers )
PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.

PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PowerQUICC based PMC module, 66 MHz, 4 serial interfaces (core signal set each) on 68 pin front panel connector (configurable via cable adopters), 16 MB DRAM, 128kB SRAM, 2 MB Flash; DCE and DTE cable adopters for X.21, X.21bis, V.35, V36; cable sencing and auto configuring serial driver logic.
PMC/Fast Ethernet/21143: (from Force Computers )
PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor

PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PCI to 100Base-Tx (Fast Ethernet) Adapter in a PMC Form Factor
PMC4U-synchronous & asynchronous protocals, SCC: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.
PMC668: (from GE Fanuc)
ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.

PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: ATM Controller in PMC form factor. The most time-critical Segmentation and Reassembly (SAR) functions are performed in dedicated hardware, allowing full bandwidth access to the ATM physical layer. The ATM interface controller has local, dedicated SRAM memory for storing connection data, buffer addresses, etc. The PMC668 can sustain full duplex SAR at full 155Mbps transmission rates.
PMC860-E1/T1: (from Force Computers )
PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.

TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC860 (PowerQUICC) based telecom PMC module with 2 E1/T1 interfaces and SCbus support for telephony applications; supported host systems include CompactPCI and VME; SS7 protocol stack available from leading vendors.
TPMC402-11: (from TEWS TECHNOLGIES GmbH)
Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Dual E1 interface based on MPC860P / 80 MHz; 32 MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C
TPMC402-31: (from TEWS TECHNOLGIES GmbH)
Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Dual T1 interface based on MPC860P / 80 MHz; 32MB SDRAM and 4 MB FLASH memory; PCI interface by Tundra QSPAN-II; Two RJ45 connectors mounted in front panel; Operating temperature 0�C to +70�C
wanPMC-1HSSI: (from SBE, Inc.)
* Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: * Full T3 to support DS3 Network Service Unit 
* Full E3 for speeds of up to 32Mbps 
* Fractional T3 and E3 bandwidth 
* Inverse T1 and E1 multiplexors 
* DTE to DCE connectivity 
* Hardware performs HDLC functions (flags, bit-stuffing, CRCs) * Uses Scatter/Gather Bus Master DMA * Transmits and receives variable length frames * Data bit rates from 1.5 Mbps to 52 Mbps
wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.

wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplexor applications. This adapter supports HDLC framing required for Frame Relay and PPP connectivity.
Coupled with powerful software routing engines in commercial operating systems like Solaris and open-source UNIX, or real-time OS environments like VxWorks , this wanPMC-1SSI adapter provides an especially cost-effective WAN connectivity alternative for these innovative new router and switch designs.
wanPMC-1T3: (from SBE, Inc.)
SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.

wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: SBE's wanPMC-1T3 adapter plugs into any router or server with a standard 33 MHz PCI bus. It provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself. Operating at 44.736 Mbps, so called T3 lines are the most effective and widely used means for providing very high speed data services solutions. The adapter supports HDLC frames used in a wide variety of applications including Frame Relay, Cisco HDLC, and synchronous Point to Point Protocol.
Solaris and open source Unix systems have excellent routing engines, which can easily take advantage of 44 Mbps data streams. An existence proof is offered by the system's support for multiple Fast Ethernet connections. The wanPMC-1T3 provides a modern DS3 connection for routers and switches.
wanPMC-2SSI Dual Port Synchronous Serial: (from SBE, Inc.)
High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port.

Interfaces available for V.35, X.21, EIA-232D, and EIA-530.
wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.