Graphics & Image Processing

Home

Vendors

Products

Graphics & Image Processing

3779 -- SVGA/DVI Video Adapter: (from Technobox, Inc.)
The 3779 is a 69030-based SVGA and DVI adapter. DVI front panel connector. 4 MB video RAM. Panellink interface chip provides bit-serial LVD output for LCDs. DIP switches allow user-selectable configuration of X and Y res, color depth, and scan rate. LVD and SVGA interfaces can be used simultaneously for dual-monitor applications.

ArgusPMC Dual Graphics/Video-In with Audio & USB: (from Rastergraf, Inc)
Rastergraf's ArgusPMC features dual independent, high hesolution, VGA/DVI graphics controllers, dual independent video digitizers, audio stereo I/O, and a USB 2.0 host controller, all on a single PMC module.
The ArgusPMC fulfills high performance requirements for dual channel graphics and video acquisition common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the ArgusPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the ArgusPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
Other features of the ArgusPMC include dual Conexant Fusion 878A video digitizers, an NEC uPD720101 USB 2.0 host controller, and a Micronas UAC3556B USB Audio Stereo I/O CODEC. The UAC3555B supports mono microphone or stereo line-in and stereo line-out, 5-band equalizer, volume, balance, and tone controls
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz. The 33 MHz PCI digitizers and USB are decoupled from the graphics PCI bus by a secondary bridge.
The ArgusPMC has an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI, dual VGA, dual USB, dual S-Video in, and Stereo Audio In and Out 3.5mm jacks.

Eclipse3PMC High Resolution Graphics Controller: (from Rastergraf, Inc)
Rastergraf's Eclipse3PMC board fulfills high performance requirements for graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using a 128-bit Borealis graphics accelerator, the Eclipse3 supports 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync-On-Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the Eclipse3 to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
The Eclipse3PMC is available either with a front-panel VGA or DVI-I (DVI+VGA) connector. It can be ordered with an on-board 3.3V regulator for systems that do not supply 3.3V to the backplane.
The Eclipse3 is also available in the CompactPCI (CPCI) form factor.

GeminiPMC Dual Channel Graphics Controller: (from Rastergraf, Inc)
Rastergraf's GeminiPMC has dual independent, high resolution VGA/DVI graphics controller. The GeminiPMC fulfills high performance requirements for dual channel graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the GeminiPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the GeminiPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz.
The GeminiPMC has two standard VGA connectors. When the optional DVI is ordered, they are replaced by an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI-I (DVI+VGA) channels.

MPMC301: (from Motorola Inc., Embedded Communications Computing)
Graphics PMC based on the Cirrus 5446 graphics controller with 4MB of video DRAM, this single-wide PMC module with frontpanel I/O provides SVGA support for monitors with upto 1280x1024 resolution

PMC-704 Dual Input Output Graphics PMC: (from Curtiss-Wright Controls, Inc.)
PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.

PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: The 3779 is a 69030-based SVGA and DVI adapter. DVI front panel connector. 4 MB video RAM. Panellink interface chip provides bit-serial LVD output for LCDs. DIP switches allow user-selectable configuration of X and Y res, color depth, and scan rate. LVD and SVGA interfaces can be used simultaneously for dual-monitor applications.
ArgusPMC Dual Graphics/Video-In with Audio & USB: (from Rastergraf, Inc)
Rastergraf's ArgusPMC features dual independent, high hesolution, VGA/DVI graphics controllers, dual independent video digitizers, audio stereo I/O, and a USB 2.0 host controller, all on a single PMC module.
The ArgusPMC fulfills high performance requirements for dual channel graphics and video acquisition common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the ArgusPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the ArgusPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
Other features of the ArgusPMC include dual Conexant Fusion 878A video digitizers, an NEC uPD720101 USB 2.0 host controller, and a Micronas UAC3556B USB Audio Stereo I/O CODEC. The UAC3555B supports mono microphone or stereo line-in and stereo line-out, 5-band equalizer, volume, balance, and tone controls
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz. The 33 MHz PCI digitizers and USB are decoupled from the graphics PCI bus by a secondary bridge.
The ArgusPMC has an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI, dual VGA, dual USB, dual S-Video in, and Stereo Audio In and Out 3.5mm jacks.

Eclipse3PMC High Resolution Graphics Controller: (from Rastergraf, Inc)
Rastergraf's Eclipse3PMC board fulfills high performance requirements for graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using a 128-bit Borealis graphics accelerator, the Eclipse3 supports 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync-On-Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the Eclipse3 to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
The Eclipse3PMC is available either with a front-panel VGA or DVI-I (DVI+VGA) connector. It can be ordered with an on-board 3.3V regulator for systems that do not supply 3.3V to the backplane.
The Eclipse3 is also available in the CompactPCI (CPCI) form factor.

GeminiPMC Dual Channel Graphics Controller: (from Rastergraf, Inc)
Rastergraf's GeminiPMC has dual independent, high resolution VGA/DVI graphics controller. The GeminiPMC fulfills high performance requirements for dual channel graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the GeminiPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the GeminiPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz.
The GeminiPMC has two standard VGA connectors. When the optional DVI is ordered, they are replaced by an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI-I (DVI+VGA) channels.

MPMC301: (from Motorola Inc., Embedded Communications Computing)
Graphics PMC based on the Cirrus 5446 graphics controller with 4MB of video DRAM, this single-wide PMC module with frontpanel I/O provides SVGA support for monitors with upto 1280x1024 resolution

PMC-704 Dual Input Output Graphics PMC: (from Curtiss-Wright Controls, Inc.)
PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.

PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: Rastergraf's ArgusPMC features dual independent, high hesolution, VGA/DVI graphics controllers, dual independent video digitizers, audio stereo I/O, and a USB 2.0 host controller, all on a single PMC module.
The ArgusPMC fulfills high performance requirements for dual channel graphics and video acquisition common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the ArgusPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the ArgusPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
Other features of the ArgusPMC include dual Conexant Fusion 878A video digitizers, an NEC uPD720101 USB 2.0 host controller, and a Micronas UAC3556B USB Audio Stereo I/O CODEC. The UAC3555B supports mono microphone or stereo line-in and stereo line-out, 5-band equalizer, volume, balance, and tone controls
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz. The 33 MHz PCI digitizers and USB are decoupled from the graphics PCI bus by a secondary bridge.
The ArgusPMC has an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI, dual VGA, dual USB, dual S-Video in, and Stereo Audio In and Out 3.5mm jacks.
Eclipse3PMC High Resolution Graphics Controller: (from Rastergraf, Inc)
Rastergraf's Eclipse3PMC board fulfills high performance requirements for graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using a 128-bit Borealis graphics accelerator, the Eclipse3 supports 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync-On-Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the Eclipse3 to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
The Eclipse3PMC is available either with a front-panel VGA or DVI-I (DVI+VGA) connector. It can be ordered with an on-board 3.3V regulator for systems that do not supply 3.3V to the backplane.
The Eclipse3 is also available in the CompactPCI (CPCI) form factor.

GeminiPMC Dual Channel Graphics Controller: (from Rastergraf, Inc)
Rastergraf's GeminiPMC has dual independent, high resolution VGA/DVI graphics controller. The GeminiPMC fulfills high performance requirements for dual channel graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the GeminiPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the GeminiPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz.
The GeminiPMC has two standard VGA connectors. When the optional DVI is ordered, they are replaced by an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI-I (DVI+VGA) channels.

MPMC301: (from Motorola Inc., Embedded Communications Computing)
Graphics PMC based on the Cirrus 5446 graphics controller with 4MB of video DRAM, this single-wide PMC module with frontpanel I/O provides SVGA support for monitors with upto 1280x1024 resolution

PMC-704 Dual Input Output Graphics PMC: (from Curtiss-Wright Controls, Inc.)
PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.

PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: Rastergraf's Eclipse3PMC board fulfills high performance requirements for graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using a 128-bit Borealis graphics accelerator, the Eclipse3 supports 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync-On-Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the Eclipse3 to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
The Eclipse3PMC is available either with a front-panel VGA or DVI-I (DVI+VGA) connector. It can be ordered with an on-board 3.3V regulator for systems that do not supply 3.3V to the backplane.
The Eclipse3 is also available in the CompactPCI (CPCI) form factor.
GeminiPMC Dual Channel Graphics Controller: (from Rastergraf, Inc)
Rastergraf's GeminiPMC has dual independent, high resolution VGA/DVI graphics controller. The GeminiPMC fulfills high performance requirements for dual channel graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the GeminiPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the GeminiPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz.
The GeminiPMC has two standard VGA connectors. When the optional DVI is ordered, they are replaced by an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI-I (DVI+VGA) channels.

MPMC301: (from Motorola Inc., Embedded Communications Computing)
Graphics PMC based on the Cirrus 5446 graphics controller with 4MB of video DRAM, this single-wide PMC module with frontpanel I/O provides SVGA support for monitors with upto 1280x1024 resolution

PMC-704 Dual Input Output Graphics PMC: (from Curtiss-Wright Controls, Inc.)
PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.

PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: Rastergraf's GeminiPMC has dual independent, high resolution VGA/DVI graphics controller. The GeminiPMC fulfills high performance requirements for dual channel graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.
Using two 128-bit Borealis graphics accelerators, the GeminiPMC supports independent 2D, 3D, OpenGL, and DirectX compatible displays. Monitor support includes non-interlaced analog VGA and Sync On Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the GeminiPMC to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.
A unique asynchronous PCI bridge design supports all PMC interfaces from 32-bit, 33 MHz to 64-bit, 66 MHz, while enabling the Borealis graphics accelerators to always operate at 32-bit, 66 MHz.
The GeminiPMC has two standard VGA connectors. When the optional DVI is ordered, they are replaced by an MDR-68 connector, which when used with an available breakout cable, supplies dual DVI-I (DVI+VGA) channels.
MPMC301: (from Motorola Inc., Embedded Communications Computing)
Graphics PMC based on the Cirrus 5446 graphics controller with 4MB of video DRAM, this single-wide PMC module with frontpanel I/O provides SVGA support for monitors with upto 1280x1024 resolution

PMC-704 Dual Input Output Graphics PMC: (from Curtiss-Wright Controls, Inc.)
PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.

PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: Graphics PMC based on the Cirrus 5446 graphics controller with 4MB of video DRAM, this single-wide PMC module with frontpanel I/O provides SVGA support for monitors with upto 1280x1024 resolution
PMC-704 Dual Input Output Graphics PMC: (from Curtiss-Wright Controls, Inc.)
PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.

PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: PMC-704 is a PCI Mezzanine Card (PMC) form factor, ruggedized, high-performance, feature rich Graphics PMC. This IEEE 1386.1 Graphics PMC is the premiere Graphics PMC in our product line. PMC-704 will provide a platform for customers to design, develop and deploy high-performance graphics sub-systems capable of supporting synthetic graphics and video overlay output as well as analog and digital capture. With support for both legacy and new video interfaces, PMC-704 is an ideal solution for both new and retrofit ground, naval and avionics platforms.
PMC-724 Frame Grabber PMC: (from Curtiss-Wright Controls, Inc.)
The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled

PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: The PMC-724 mezzanine module is a ruggedized IEEE 1386.1 PMC Frame Grabber providing high-performance image capture capabilities. The PMC-724 Frame Grabber captures both analog and digital video input formats and supports high speed transfer of the captured images to system memory (e.g. basecard or other PCI-accessible memory). Applications such as target tracking and UAV image capture are ideally suited for the PMC-724 where analog or digital video data is gathered in realtime then transferred to a basecard (e.g. CWCEC's VME-179, VME-181, Cornerstone (VME-712) or CHAMP-AV II) for processing.

* Optimized real-time video capture PMC
* High speed data transfer to a PCI-mapped memory
* Digital and Analog video capture
* LVDS interface supporting digital video capture (interlaced and non-interlaced)
* Four selectable analog video inputs including NTSC, PAL, RS-170 and S-Video
* Extensive flexibility through the onboard Field Programmable Gate Array (FPGA)
* Supported under VxWorks (Tornado 2) for PowerPC X11 Server and GUI independent software support
* PCI Rev 2.1 compliant, 32 bit, 33/66Mhz capable
* Available in the full range of ruggedization levels, both air and conduction cooled
PMC-VIDEO-AI2: (from General Standards Corporation)
The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.

PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: The PMC-VIDEO-AI2 is a two channel video input board that includes two video digitizers, FIFOs, and a DMA engine. Each video digitizer provides luminance and chrominance signal processing for NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, PAL BGHI, PAL N, PAL M, and SECAM. Once the interface has been initialized it transfers frame-after-frame of video input to host memory without host intervention. It can transfer all frames from two channels for either 8-bit or 16-bit format.
PMC-VideoPlus: (from SBS Technologies)
SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.

TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: SVGA graphics controller with 1280x1024 resolution at 75 MHz with 24 bpp.
TopazPMC VGA/DVI/LVDS/Video Graphics & Capture: (from Rastergraf, Inc)
Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.

VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: Rastergraf's TopazPMC features high resolution VGA, DVI, and LVDS Graphics with video, STANAG, DVI, and RGB digitizers and depending on configuration, supports single or dual display outputs.
TopazPMC features a Silicon Motion SM731 System On a Chip (SOC) graphics accelerator with 16 Mbytes of on-chip SDRAM. This 128-bit 2D/3D graphics engine supports compatible displays at up to 1600 x 1200 x 24 bpp (16.7 million colors). It supports multiple display options (please see the datasheet).
The TopazPMC features the Conexant Bt835 NTSC/PAL/S-Video and Analog Devices AD9882 High Speed RGB/DVI digitizers. STANAG 3350 A-C input signals can be captured through the AD9882. A loopback can connect Video Output to Input for self-testing.
Rastergraf´s factory configured I/O Resource Matrix maximizes I/O flexibility, enabling most functions to be connected to either the front or rear panel. Please contact Rastergraf for more information.
VMIPMC-7462: (from GE Fanuc)
Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.: Single-Wide PMC-Based SVGA Adapter, 640 x 480 x 1,600 x 1,200 Resolutions supported, up to 24-bit color panels, Chips and Technology 69030 Video Adapter with 4 Mbyte internal SDRAM, with 64-bit internal graphics engine.