Intelligent Carriers

Home

Vendors

Products

Intelligent Carriers

CPCIBPMC6UET: (from Dynamic Engineering)
6U cpci bridge based PMC carrier. 2 PMC Slots. Transparent and Non-Transparent modes

PMC2PCI: (from Dynamic Engineering)
Save development time by using a PCI card in a PMC slot. The PMC2PCI (PMC to PCI) adapter / carrier converter card provides the ability to install a PCI card into a standard PMC slot. The PMC2PCI has two PCI card slots mounted to a PMC card. One slot can be used at a time with the choice of 3V or 5V IO and 32/33 or 64/66 MHz PCI clocks. http://www.dyneng.com/pmc2pci.html

Some PMC carriers do not supply 3.3V. The PMC2PCI has an on-board regulator that can supply up to 700 mA at 3.3V. If the carrier does have 3.3V available; the regulator can be bypassed via a user shunt or an optional high current shunt.

Features: 32 or 64 bit operation, 33 or 66 MHz PCI clock rate

4285-030: (from Pentek)
The Model 4285-030 is an octal 'C40 processor board that accepts up to three PMC modules. This board is scalable and can hold a variable number of processors, local and global memory is scalable up to 27 MB of SRAM.

4286: (from Pentek)
The Model 4286 is a dual 'C80 VME board that has a PMC site. It offers 5 BOPS performance, 60 MHz operation, VME64 master/slave interface an scalable memory.

Centellis 4730: (from Force Computers )
333MHz Low power Pentium II; CompactPCI system with SENTINEL PCI-to-PCI
bridge technology

Centellis 8522: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 6U cpci bridge based PMC carrier. 2 PMC Slots. Transparent and Non-Transparent modes
PMC2PCI: (from Dynamic Engineering)
Save development time by using a PCI card in a PMC slot. The PMC2PCI (PMC to PCI) adapter / carrier converter card provides the ability to install a PCI card into a standard PMC slot. The PMC2PCI has two PCI card slots mounted to a PMC card. One slot can be used at a time with the choice of 3V or 5V IO and 32/33 or 64/66 MHz PCI clocks. http://www.dyneng.com/pmc2pci.html

Some PMC carriers do not supply 3.3V. The PMC2PCI has an on-board regulator that can supply up to 700 mA at 3.3V. If the carrier does have 3.3V available; the regulator can be bypassed via a user shunt or an optional high current shunt.

Features: 32 or 64 bit operation, 33 or 66 MHz PCI clock rate

4285-030: (from Pentek)
The Model 4285-030 is an octal 'C40 processor board that accepts up to three PMC modules. This board is scalable and can hold a variable number of processors, local and global memory is scalable up to 27 MB of SRAM.

4286: (from Pentek)
The Model 4286 is a dual 'C80 VME board that has a PMC site. It offers 5 BOPS performance, 60 MHz operation, VME64 master/slave interface an scalable memory.

Centellis 4730: (from Force Computers )
333MHz Low power Pentium II; CompactPCI system with SENTINEL PCI-to-PCI
bridge technology

Centellis 8522: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Save development time by using a PCI card in a PMC slot. The PMC2PCI (PMC to PCI) adapter / carrier converter card provides the ability to install a PCI card into a standard PMC slot. The PMC2PCI has two PCI card slots mounted to a PMC card. One slot can be used at a time with the choice of 3V or 5V IO and 32/33 or 64/66 MHz PCI clocks. http://www.dyneng.com/pmc2pci.html

Some PMC carriers do not supply 3.3V. The PMC2PCI has an on-board regulator that can supply up to 700 mA at 3.3V. If the carrier does have 3.3V available; the regulator can be bypassed via a user shunt or an optional high current shunt.

Features: 32 or 64 bit operation, 33 or 66 MHz PCI clock rate
4285-030: (from Pentek)
The Model 4285-030 is an octal 'C40 processor board that accepts up to three PMC modules. This board is scalable and can hold a variable number of processors, local and global memory is scalable up to 27 MB of SRAM.

4286: (from Pentek)
The Model 4286 is a dual 'C80 VME board that has a PMC site. It offers 5 BOPS performance, 60 MHz operation, VME64 master/slave interface an scalable memory.

Centellis 4730: (from Force Computers )
333MHz Low power Pentium II; CompactPCI system with SENTINEL PCI-to-PCI
bridge technology

Centellis 8522: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The Model 4285-030 is an octal 'C40 processor board that accepts up to three PMC modules. This board is scalable and can hold a variable number of processors, local and global memory is scalable up to 27 MB of SRAM.
4286: (from Pentek)
The Model 4286 is a dual 'C80 VME board that has a PMC site. It offers 5 BOPS performance, 60 MHz operation, VME64 master/slave interface an scalable memory.

Centellis 4730: (from Force Computers )
333MHz Low power Pentium II; CompactPCI system with SENTINEL PCI-to-PCI
bridge technology

Centellis 8522: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The Model 4286 is a dual 'C80 VME board that has a PMC site. It offers 5 BOPS performance, 60 MHz operation, VME64 master/slave interface an scalable memory.
Centellis 4730: (from Force Computers )
333MHz Low power Pentium II; CompactPCI system with SENTINEL PCI-to-PCI
bridge technology

Centellis 8522: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 333MHz Low power Pentium II; CompactPCI system with SENTINEL PCI-to-PCI
bridge technology
Centellis 8522: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Mid-range 8 slot CompactPCI system based on a 333 MHz UltraSPARC IIi processor, highly reliable; redundant and hot swappable power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards
Centellis 8540: (from Force Computers )
8 slot UltraSPARC-IIe-based CompactPCI system

Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 8 slot UltraSPARC-IIe-based CompactPCI system
Centellis 8730: (from Force Computers )
Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards

Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Mid-range 8 slot CompactPCI system based on a Intel 333 MHz Pentium II Low Power (LP) processor-module; highly reliable; Hot Swap redundant power supplies, fan and storage modules; support of CompactPCI Full Hot Swap Specification for I/O boards
Centellis CO 16723: (from Force Computers )
Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU

Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Fault resilient system, 19" or 23" rack mount, 16 slot Hot Swap CompactPCI backplane with H.110 bus support. 233 MHz Pentium based single board computer; Hot Swap redundant fan modules, hard disk drives and n+1 500 W PSU
Centellis CO 88520: (from Force Computers )
NEBS - tested, dual 8 slot cluster, UltraSPARC

Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: NEBS - tested, dual 8 slot cluster, UltraSPARC
Centellis CT 16523: (from Force Computers )
Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU

Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Modular 16 slot CompactPCI system with 14 6U expansion slots supporting H.110 Ctbus, designed for minimized MTTR;300 MHz UltraSPARC-IIi CPU, 2 x Hot Swap backplane and 2 x 300 W PSU
Centellis CT 16723: (from Force Computers )
16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.

Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 16 slot CompactPCI system with a 233 MHz MMX-based processor offering H.110 Ctbus support through 14 of it's 6U I/O slots. Including are a 4 GByte IDE HDD mounted in a Mass Storage cartridge, CDROM, floppy, 64 Mbytes of DRAM and SVGA graphics.
Centellis CT 16763: (from Force Computers )
Computer telephony, 16 slot, Intel® Pentium III-based

CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Computer telephony, 16 slot, Intel® Pentium III-based
CompactPCI or VME Switched Fabric Board: (from Concurrent Technologies)
The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.

CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The FP 100/008 is an "unmanaged" embedded Ethernet switching platform that provides a low cost, low power, switching solution for telecoms OEMs and integrators. Dissipating less than 5 Watts, it offers ten 10/100 auto-negotiating Ethernet ports, eight accessible via a PICMG 2.16 or VITA 31.1 packet switched backplane. The switch core contains a high-speed, non-blocking, layer 2, four traffic class Quality of Service (QoS) switch fabric. Designed for applications that do not require sophisticated features this board is available at a much lower price than traditional, feature-rich switches. Also provided is PICMG 2.9 IPMI system monitoring and hot insertion/removal to the backplane. The FP 100/008 includes VLAN security features for layer 2 firewall protection. Typical applications include networking equipment, VoIP telephony systems and blade-based servers.
CP PSE/30x: (from Concurrent Technologies)
Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.

CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Multibus II: 800MHz Pentium III with SCSI, Ethernet, PMC, 2 x COM, up to 512 Mbytes DRAM, keyboard, mouse, 2 x USB. The board provides system engineers with a smooth, low risk, migration to meet higher performance computing requirements as well as providing systems applications with an extended life.
CPCI-720 and CPCI-721: (from Force Computers )
Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA

CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Pentium based CompactPCI single board computer, up to 256MB DRAM, 233MHz, PMC slots and on-board HD/FD/SVGA
CPCI-730: (from Force Computers )
Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk

CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Pentium II Mobile Module based CompactPCI single slot workstation, 266 or 333 MHz, two PMC slots, Ethernet, onboard optional SVGA and hard disk
CPN5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.
CPV5350: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.

CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: CompactPCI single-slot SBC using a Pentium® II low power module processor at 266MHz & 333MHz. Std PC I/O, including USB, PCI EIDE, AGP graphics, dual Fast Ethernet controllers, soldered flash, Compact Flash. Hot-swap compliant.
CPV5360: (from Motorola Inc., Embedded Communications Computing)
CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.

IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: CompactPCI single-slot SBC using a Pentium II Low Power Module. Selectable as Compact PCI peripheral or system controller. 16MB solid-state disk, USB, EIDE, AGP graphics, Dual Fast Ethernet controllers, standard PCI/O plus two PMC sites. Hot Swap compliant.
IO PMC/731 Dual 1600x1200 CRT/DFP Graphics PMC: (from Concurrent Technologies)
The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board. 

M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The IO PMC/731 is a dual 1600x1200 graphics adaptor with analog RGB (to CRT) and digital flat panel (DFP) outputs. The IO PMC/731 is one of the industry´s first PMC adaptors to support DFP resolutions up to 1600x1200. Plus, both CRT and DFP outputs can be driven simultaneously with either different images or resolutions. Each output is available via a front panel DVI-I connector and the DFP PanelLink® output is also accessible via the P4 rear panel. The DFP interface cable can be up to 5 meters in length. The IO PMC/731 can be used with Concurrent Technologies' CompactPCI® and VME or any other PMC compliant host board.
M6000 VXS PowerPC 440SP IO Carrier: (from Curtiss-Wright Controls, Inc.)
The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available

MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The M6000 is a PowerPC™ based VXS (VITA 41)/VME I/O controller. In addition to it's I/O controller functionality, the M6000 can also perform as an intelligent XMC/PMC carrier, a system controller, high-speed data streaming board and a recording engine. Focusing on I/O capabilities, the M6000 performance high-speed data buffering and flexible data flow between I/O ports. Curtiss-Wright achieves this through I/O connections on the front panel, dual XMC/PMC (PCI Mezzanine) sites and backplane connectors. Thus, the M6000 constitutes an important element of our innovative Phoenix family of products for embedded real-time Data Acquisition, Processing and Recording using high-speed serial communications.

* Dual XMC sites with x8 PCI Express connections
* VXS Interface implemented using Virtex-4 FX FPGA
* AMCC PowerPC 440SP processor
* Dual 4Gb/s Fibre Channel ports
* 320 MB/s 2eSST VME interface
* 512 MByte high-speed streaming memory
* On-board PCI Express switch for optimal data flow
* Independent 64 bit, 133MHz PCI-X bus for each PMC site
* Ruggedized versions available
MCP750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: MPC750 Powerplus architecture single-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules
MCPN750: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules

MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: MPC750 Powerplus architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, 10/100 Mbit Ethernet, dual USB, EIDE interfaces, 16-256 MB ECC DRAM, 1MB L2 cache. Supports basic, full and high availability PICMG hot-swap modules
MCPN765: (from Motorola Inc., Embedded Communications Computing)
MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.

MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: MPC7400 Powerplus II architecture non-system-slot SBC. PCI bus for on-board peripherals, processor/ memory bus to bus PCI bridge, 64-bit bridge to CompactPCI interface, dual 10/100 Mbps Ethernet, dual USB, EIDE interfaces, 2 PMC slots, 1GB ECC SDRAM. Hot-swap compatible.
MTX603/604: (from Motorola Inc., Embedded Communications Computing)
ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.

MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: ATX form factor motherboard. PowerPlus Architecture, single or dual PowerPC603 or PowerPC604 processors, 10/100 Mb/s Ethernet, EIDE, and SCSI. Expandability for up to two PMC modules.
MVME2100: (from Motorola Inc., Embedded Communications Computing)
VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.

MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: VMEbus SBC.MPMC8240 @ 200 or 250 MHz. 32/64MB SDRAM, 4/8MB Ethernet, 1 SIO. 3 PC*MIP Type II slots with Front Panel I/O & P2 I/O. PCI expansion connector supports 4 additional PMC cards.
MVME2300: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Powerplus VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 4MB FLASH, 16-128 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.
MVME2400: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.

MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: MPC750 Powerplus II VME architecture SBC. Dual IEEE P1386.1-compliant PMC slots, 10/100 Mbit Ethernet, 8MB FLASH, 32-512 MB ECC SDRAM. PCI expansion connector supports 4 additional PMC cards.
MVME2600: (from Motorola Inc., Embedded Communications Computing)
Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.
MVME2700: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.

MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: MPC750 Powerplus VME architecture SBC with PMC and SCSI Interfaces. IEEE P1386.1-compliant PMC slot, 10/100 Mbit Ethernet, 8MB FLASH, 16-256 MB ECC DRAM via memory mezzanine, 8 or 16 bit fast SCSI . PCI expansion connector supports 4 additional PMC cards.
MVME5100: (from Motorola Inc., Embedded Communications Computing)
MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.

NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: MPC750 Powerplus II VME architecture SBC. Dual 64-bit, 33MHz PMC slot, Dual 10/100 Mbit Ethernet, 17MB FLASH, 64 or 512 MB SDRAM, parallel port, dual serial ports, two async/sync and two async serial ports, ultra wide SCSI.
NVTP1001: (from N.A.T. GmbH)
The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.

PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The NVTP1001 is a high-performance hot swap 6U cPCI board, based on the Motorola versatile MPC8265/8280 “PowerQuicc II” processor. It provides 2 PMC slots for use with any PMC modules as well as a Gigabit Ethernet port using either a standard RJ45 1000BaseT connector or an optical fibre connector on the front panel. With its unique and open design the NVTP1001 enables the customer to interconnect between any type of network physics using a one slot single board computer. The on-board central switching resource (a programmable Routing Pool) optimizes the NVTP1001 for use in any sophisticated telecom and networking applications such as SS7, ISDN, ATM or VoP or interconnecting environments. The NVTP1001 supports both the H.110 (PICMG 2.5) and the IP-Backplane (PICMG 2.16) standards.
PCIBPMC: (from Dynamic Engineering)
Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate

PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Save time and money, install your reliable PMC cards into your PCI backplane. The PCIBPMC adapter card provides the ability to install a PMC card into a standard PCI slot, featuring independent signal levels on each side of the bridge, built in 3.3V supply32/33 or 64/66 MHz PCI clocks. The bridge insures that multiple PCIBPMC cards can be installed onto the same PCI bus stub. http://www.dyneng.com/pciBpmc.html Features: The PCIBPMC has a PMC card slot mounted to a universal 1/2 length PCI card. 32 or 64 bit operation 33 or 66 MHz PCI clock rate
PMC900-C: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM

PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, 4MB base DRAM
PMC900-D: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM

PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, 8MB base DRAM
PMC900-H: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM

PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, 128MB base DRAM
PMC900-I: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM

PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, 256MB base DRAM
PMC901/CA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector

PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, connects to host PMC, AUI Ethernet connector
PMC901/CJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector

PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, connects to host PMC, RJ45 Ethernet connector
PMC901/M1A: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector

PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, AUI Ethernet connector
PMC901/M1J: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector

PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, connects to Motorola 23xx, RJ45 Ethernet connector
PMC901/MA: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector

PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, AUI Ethernet connector
PMC901/MJ: (from GE Fanuc)
Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector

PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intelligent PMC expansion module, i960 co-processor, connects to Motorola 26xx/36xx, RJ45 Ethernet connector
PMCspan: (from Motorola Inc., Embedded Communications Computing)
PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.

PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PMC Expansion Board for Powerplus VME architecture. Single slot 6U VMEbus format, DEC 21150 PCI-to-PCI interface bridge. Support for two single-wide or one double-wide PCI Mezzanine Card per PMCspan.
PowerCore CPCI-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface

PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC 750 based flexible platform, 233, 300 or 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, CompactPCI Slave interface
PowerCore-6603: (from Force Computers )
PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC 603e based flexible platform, 120 or 166 MHz, 16 to 272 MByte DRAM, one memory expansion slot, up to 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface
PowerCore-6604: (from Force Computers )
PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface

PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC 604e based flexible platform, 200 or 300 MHz, 16 to 272 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, two PMC slots with P2 I/O, 10BaseT Ethernet, serial I/O, VME64 interface
PowerCore-6604-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface

PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 MByte DRAM, one memory expansion slot, 512KByte L2 Cache, 4 MByte Flash, SCSI-2 Interface, one PMC slot, AUI Ethernet, 5 x serial I/O, VME64 interface
PowerCore-6750: (from Force Computers )
PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface

PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC 750 based flexible platform, 233, 300 and 400 MHz, 16 to 256 MByte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, two PMC slots with P2 I/O, 10/100BaseTX Ethernet, two serial I/O, VME64 interface
PowerCore-6750-SSIO: (from Force Computers )
PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface

PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC 750 based flexible platform, 233 or 300 MHz, 16 to 256 Mbyte DRAM EDO or Synchronous DRAM, 512KByte or 1 Mbyte L2 Cache, 4 or 8 MByte Flash, one PMC slot with P2 I/O, SCSI-2 Interface, 10/100BaseTX Ethernet, four serial I/O, VME64 interface
PP 220/012 Dual Xeon board: (from Concurrent Technologies)
6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.

PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 6U CompactPCI System Controller. Dual 2.0GHz Low Voltage Intel Xeon, 512K L2, 400MHz bus, Hyper Threading. 64-bit ServerWorks chipset. Dual Gigabit Ethernet channels, 2 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). System slot or satellite. 64bit/66MHz PMC site. Up to 4Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel.
PP 110/01x Dual PMC, System or Periph Slot: (from Concurrent Technologies)
CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.

PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: CompactPCI: single-slot 1.2GHz or 800MHz Pentium III with EIDE, 2 x Gigabit Ethernet, 2 x PMC, Graphics, 1 x COM, up to 1.5 Gbytes DRAM, keyboard & mouse via a 26-way high-density connector, 1 x USB. Front and rear I/O for both sites. The PP 110/01x is ideally suited to I/O intensive embedded applications. Extended temperature version available.
PP 200/01x Mobile Pentium 4 Processor-M: (from Concurrent Technologies)
6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.

PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 6U CompactPCI System/Peripheral/Satellite Controller. 2.2GHz or 1.7GHz Intel Pentium 4 Processor-M, 512K L2, 400MHz bus. 64-bit ServerWorks chipset. Three Gigabit Ethernet channels, 1 via front panel and 2 via rear. PICMG 2.16, PICMG 2.9 (IPMI), PICMG 2.1, CPCI signaling (32/64-bit, 33/66MHz). 64bit/66MHz PMC site. Up to 2 Gbytes of 200MHz DDR ECC SDRAM, Ultra-160 SCSI, EIDE (UDMA100), CompactFlash site and optional on-board HDD. 8 Mbytes Application Flash. SM722 Graphics, KB/MSE interface, 2 Serial ports, 2 USB ports, PC RT clock, watchdog. LAN boot firmware. Optional Transition Module. Optional blank front panel. Extended temperature version available.
PP 30x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.

PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The PP 300/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 302/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). Using the Intel® 855GME GMCH, the processor can access up to 2 Gbytes of 333 MHz DDR ECC SDRAM. The PP 30x/02x can operate as a system/peripheral slot controller or as a satellite board (blade), all with hot-swap capability. Utilizing the Intel® 6300ESB ICH, this SBC´s I/O capability includes Ultra-160 SCSI, dual EIDE ATA100 and dual Serial ATA150 interfaces, a 66MHz PMC site, four Gigabit Ethernet channels, PICMG® 2.16 and PICMG 2.9 (IPMI). Applications include telecoms, telemetry, defense, security, industrial-control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C and over -25°C to +70°C is supported.
PP 310/011-E Extended Temperature CPCI sbc: (from Concurrent Technologies)
The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).

PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The PP 310/011-E supports the 1.1 GHz Intel® Pentium® M processor, with up to 2 Gbytes of DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. As well as two PMC sites with front and rear I/O, the PP 310/011-E supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/011-E can operate as a system controller board, a peripheral board or as a satellite board (blade).
PP 310/01x CPCI Pentium M Dual PMC Board: (from Concurrent Technologies)
The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.

PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The PP 310/01x supports the 1.6GHz Intel® Pentium M processor with up to 2 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. As well as two PMC sites with front and rear I/O, the PP 310/01x supports dual Gigabit Ethernet (via a PCI-X bus), PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 310/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is front and rear plug compatible with Concurrent Technologies´ popular PP 110/01x family.
PP 312/01x - 1.8 GHz Dual PMC CPCI Board: (from Concurrent Technologies)
The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.

PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The PP 312/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The PP 312/01x, a single slot board, supports up to 2 Gbytes DDR ECC SDRAM. As well as two PMC sites with front and rear I/O, the PP 312/01x supports dual Gigabit Ethernet, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 312/01x can operate as a system controller board, a peripheral board or as a satellite board (blade) and is a form, fit and function addition to the PP 310/01x family.
PP 33x/02x Intel Pentium M Processor CPCI SBC: (from Concurrent Technologies)
The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.

PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The PP 330/02x supports the 1.6 GHz processor (1 Mbyte L2 cache) and the PP 332/02x supports either the 1.8 GHz or 1.4 GHz processor (2 Mbytes L2 cache). All boards support up to 2 Gbytes of 333 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. As well as two 66MHz PMC sites with front and rear I/O, the PP 33x/02x family supports four Gigabit Ethernet channels, PICMG® 2.16 (Packet Switching Backplane), PICMG 2.9 (IPMI) and PICMG 2.1 (hot swap). The PP 33x/02x can operate as a system controller board or as a satellite board (blade). Typical applications include defense, security, telecoms, telemetry, industrial control, scientific, and aerospace markets. For harsher applications, using the 1.4 GHz processor, operation over -40°C to +85°C (K-Series, with humidity seal) and over -25°C to +70°C (E-Series, with optional humidity seal) is available.
PP CP2/P3x Entry level CompactPCI, PICMG 2.16: (from Concurrent Technologies)
This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.

PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: This single slot board supports PICMG2.16 (Packet Switching Backplane), an ideal introduction to switched fabric applications, along with PICMG 2.9 IPMI system management. As a system controller, the PP CP2/P3x supports the PICMG 2.1 Hot Swap Specification and can also be used in satellite mode (stand-alone mode) for applications not requiring the CompactPCI backplane bus. Featuring the 1GHz or 850MHz Pentium® III processor, the PP CP2/P3x is ideal for a variety of applications including those requiring long life availability, configuration control, and high reliability.
PP PMC/002: (from Concurrent Technologies)
CompactPCI board supporting 2 x PMC modules. Rear I/O supported

RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: CompactPCI board supporting 2 x PMC modules. Rear I/O supported
RIO3 8064: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. VME64x interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP
RIOC 4064: (from Creative Electronic Systems)
2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 2 PMC slots. PPC603 / 604 @ 466 MHz with a 1MB L2 cache and up to 256 MB DRAM. 8 MB Flash EPROM. 2 x CompactPCI DMA channels with HW chained BLT (50MB/s measured on CPCI), Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP
RIOC 4065: (from Creative Electronic Systems)
2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP

SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: 2 PMC slots. PPC 750 / G4 from 466 MHz. 2 MB L2 cache and up to 1 GB DRAM, 16 MB Flash EPROM, 2 x 64-bit PCI busses. CompactPCI interface with Block Mover Accelerator (160MB/s), live insertion. Ethernet 10/100BaseT, 2xRS232. PCI backplane driver supporting TCP/IP
SC PMC/160 Single/Dual Channel Ultra160 SCSI: (from Concurrent Technologies)
Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.

SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Concurrent Technologies introduces its new low power PMC based single/dual channel Ultra160 SCSI controller, capable of SCSI synchronous data transfer rates of up to 160 Mbytes/s. The SC PMC/160 provides board options of either one or two independent Ultra160 SCSI channels by taking full advantage of the LSI53C10x0R Ultra160 SCSI controller family. The SC PMC/160 will i) improve CPU utilization, ii) maximize PCI bus transfer efficiency, iii) maximize SCSI I/O transfer reliability and iv) maximize SCSI drive compatibility. Supporting a wide range of operating systems, the SC PMC/160 is suitable for storage applications such as server systems, distributed computing, video-on-demand or image/signal processing.
SCP/DCP-201 3U cPCI Carrier Card: (from Curtiss-Wright Controls, Inc.)
SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling

SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: SCP/DCP-201 conduction-cooled carrier card is the latest member of the CompactCore line of ruggedized CPCI products. Designed to integrate CWCEC PCI mezzanine cards (PMCs), this fully ruggedized carrier card, dubbed "Little Buddy," expands functionality on its host single board computer.

Easing expansion on the host, Little Buddy enables integration of ruggedized PMCs like CWCEC's MIL-STD 1553-capable PMC-601 I/O module or PMC-704 or PMC-706 graphics controller modules. Overall, a fully integrated CompactCore SBC with a carrier card, PMC system is a "total solution" for high-performance, space/weight-constrained defense and aerospace applications.

* 3U Form Factor (VITA 30.1)
* Accommodates standard PMCs for use in a Compact PCI backplane
* Air-cooled and conduction cooled
* Integrated with CWCEC's CompactCore SCP/DCP-122
* Supports 32-bit at 33 or 66 MHz PCI interface
* Supports 3.3V or 5V PCI Signalling
SPARC CPCI-520: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion
SPARC CPU-50: (from Force Computers )
UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion

TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: UltraSPARC-IIi based system controller, 64-1024 MByte DRAM, workstation I/O plus 2nd fast Ethernet plus 2nd wide UltraSCSI, 2 PMC slots for I/O expansion
TCP8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor

TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC based 2 Slot PMC Carrier; 6U/4TE CompactPCI CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, CompactPCI interface by PLX PCI6254 universal PCI-PCI bridge, System Slot and Peripheral Slot support; 2 PMC slots (33 MHz, 32 bit) with front I/O and rear I/O on J3/J5; IEEE1101 Handles; PMON bug monitor
TVME8400-10: (from TEWS TECHNOLGIES GmbH)
PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor

V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC based 2 Slot PMC Carrier; 6U/4TE VMEbus CPU board with 2 PMC slots; MPC8245-300MHz PowerPC, 2 x async. RS232, 64MB SDRAM, 1+ 8 MB Flash, 10/100 Mbits/s Ethernet, VMEbus interface by Tundra Universe-II; 2 PMC slots (33 MHz, 32 bit) with VME64x P2 I/O, PCI Expansion connector for i.e. TVME230-xx or Motorola PMC-Span; IEEE1101 Handles; PMON bug monitor
V: (from GE Fanuc)
Optional VME interface for PMC900 (PMC900-x-V)

VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Optional VME interface for PMC900 (PMC900-x-V)
VMICPCI-7696: (from GE Fanuc)
On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.

VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: On-board PMC site, single-Slot, CompactPCI System Slot, 333MHz Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte SDRAM memory, SVGA video, two serial ports and one parallel port. 16 Mbyte/s bootable flash on secondary IDE, DiskOnChip up to 288 Mbyte option.
VMICPCI-7697: (from GE Fanuc)
PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.

VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PMC expansion site, single-Slot, CompactPCI Peripheral Slot, 333MHz, Pentium II processor, 512 Kbyte L2 cache, 512 Mbyte DRAM memory, SVGA video, two serial ports, and one parallel port. 16 Mbyte bootable flash on secondary IDE. DiskOnChip up to 288 Mbyte option.
VMICPCI-7699: (from GE Fanuc)
With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.

VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: With dual PMC expansion sites, this product is a Single-Slot Pentium II/III Embedded Module Peripheral-Slot CompactPCI CPU with High-Availability Hot Swap. Processor speeds include 333 and 500 MHz Pentium III. Offers up to 256 Mbyte of SDRAM and 96 Mbyte of CompactFlash.
VMICPCI-7710: (from GE Fanuc)
A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: A Single-slot Pentium III embedded module system-slot CompactPCI SBC, has a PMC expansion site and offers 500 MHz Pentium III processor, up to 512 Mbyte SDRAM, and up to 288 Mbyte of DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.
VMICPCI-7715: (from GE Fanuc)
A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: A Pentium III Processor-Based CompactPCI SBC with rear I/O and PMC expansion site. It offers processor speeds up to 850 MHz, SDRAM up to 512 Mbyte, and 299 Mbyte DiskOnChip. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.
VMICPCI-7755: (from GE Fanuc)
This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: This Intel Pentium III Processor-Based CPCI System Controller SBC with 133 MHz Front-Side Bus includes dual PMC expansion sites. It offers up to 733 MHz processor speeds, 512 Mbytes SDRAM, and up to 512 Mbytes of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.
VMICPCI-7756: (from GE Fanuc)
This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.

VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: This Intel Pentium III Processor with 133 MHz Front Side Bus with dual PMC expansion sites, offers up to 733 MHz processor speeds, 256 Mbyte SDRAM, and up to 192 Mbyte of CompactFlash. Applicable applications include Telecommunications, Simulation, Instrumentation, Industrial control, Process control and monitoring, Factory automation, Intelligent network PLC controllers, Automated test, and Data acquisition.
VMICPCI-7760: (from GE Fanuc)
Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.

VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Dual Pentium III FC-PGA offers up to 1 GHZ processor speeds, and up to 2 Gbyte SDRAM. It gives you the choice of No Mezzanine or Mezzanine with Dual-Channel Ultra160 SCSI and Dual PMC. Applicable applications include, Telecommunications, Medical, Military, and Simulation.
VMIVME-7592: (from GE Fanuc)
On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.

VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: On-board PMC site, with choice of 166 MHz Pentium, 200/233MHz MMX Pentium processor, up to 256MB SDRAM, 10BaseT/100BaseTX interfaces, network booting, 64-bit PCI SVGA w/2MB SGRAM. Two high-performance serial ports and one parallel port. DiskOnChip up to 288MB Flash. Software-selectable watchdog timer w/reset, Universe II.
VMIVME-7695: (from GE Fanuc)
On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.

VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: On-board PMC site, 333MHz Pentium II processor, 512 Kbyte L2 cache, up to 512 MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP video w/4MB SGRAM, dual USBports, two serial ports and one parallel port. 16MB bootable flash on secondary IDE, watchdog timer, 3 programmable timers, 32K battery backed SRAM. Flash Memory up to 288 MB.
VMIVME-7697: (from GE Fanuc)
PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.

VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PMC mezzanine expansion site. Up to 850MHz Pentium III processor-based CPU, with special features for embedded applications that include, up to 96MB bootable flash, 3 programmable 32-bit timers, 128KB of battery-backed SRAM, Remote Ethernet booting, supports VMEbusP2 connection to HD/floppy drive. Up to 512 SDRAM, and up to 192 MB Flash Memory.
VMIVME-7697A: (from GE Fanuc)
Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.

VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Pentium III processor-based SBC with PMC expansion site. It has 32-bit addressing and a 64-bit data bus. This product Offers processor speeds up to 1 GHz, SDRAM up to 512 Mbyte, and Flash Memory up to 192 Mbyte. Applicable applications are Telecommunications, Simulation, Instrumentation, Industrail control, Process control and monitoring, Factory automation, Intelligent networked PLC controllers, Automated test, and Data acquisition.
VMIVME-7698: (from GE Fanuc)
On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.

VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: On-board PMC and PC-MIP site, 300/366MHz Celeron processor, 128 Kbyte L2 cache, up to 256MB SDRAM, 10BaseT/100BaseTX Ethernet. 64-bit AGP SVGA w/2MB SGRAM, two high-performance serial ports, and up to 192MB flash memory.
VMIVME-7740: (from GE Fanuc)
PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.

VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PMC expansion site with VMEbus P2 I/O. Intel Pentium III Socket 370 Processor-Based VMEbus Single-Board Computer. Offers up to 850 MHz Pentium III PGA370 Socket Processor, CompactFlash up to 192 Mbytes, and SDRAM Memory up to 512 Mbyte.
VMIVME-7750: (from GE Fanuc)
Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.

VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Intel Pentium III Processor-Based VMEbus SBC with PMC expansion site. This product offers up to 933 MHz processor speeds, up to 512 Mbyte SDRAM and up to 192 Mbyte CompactFlash.
VP 101/01x Commercial/Ext Temp Pentium III: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®

VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Concurrent Technologies is extending the operating temperature of its popular high performance Pentium III VME SBC family. There are three single slot family versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions consists of the 800MHz VP 101/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 101/010-E operating over -25°C to +70°C. The VP 101/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. The family supports a single PMC site (32/64-bit up to 66MHz) with an expansion connector providing 2 further PMC sites on an optional carrier. UDMA100 EIDE and Ultra Wide SCSI interfaces are provided with options for an on-board EIDE 1.8-inch disk drive or CompactFlash™/IBM® Microdrive™.
 
At the core of the VP 101 family is the Low Voltage Intel Pentium III “Tualatin” (0.13 micron) processor in a “Flip Chip” package. The processor supports 512 Kbytes of high-speed secondary cache and, in conjunction with the ServerWorks™ ServerSet™ III LE chipset, operates a 133MHz front side bus. As with all Concurrent Technologies´ designs, heat sinks are used in preference to fans for cooling the CPU.
 
The board provides, soldered on board, 512 Mbytes or 1Gbyte of 133MHz ECC S-DRAM that can easily be upgraded to 1.5 Gbytes via the onboard memory socket. Other features are a dual 10baseT/100baseTX Ethernet interface, keyboard/mouse interface, PC real-time clock, 2 RS232 channels, 2 USB ports, parallel printer port, watchdog timer, long duration timer and a Silicon Motion´s graphics interface with Digital Flat Panel support. A P2 breakout module is provided to facilitate integration in specific applications requiring rear I/O connection.
 
For ease of integration, the VP 101 family supports many of today´s leading operating systems, including VxWorks®, Windows NT®, Windows® 2000, Windows® XP, RTX®, Linux®, QNX® and MS-DOS®
VP 110/010-E or -K Extended Temp VME Board: (from Concurrent Technologies)
Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.

VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: Concurrent Technologies is extending the operating temperature of its popular high performance VP 110/01x; a VME based dual PMC intelligent carrier that is ideally suited to intensive I/O or data applications. There are now four single slot product versions, all using the Low Voltage Intel® Pentium III Processor 512K. The two extended temperature versions are the 800MHz VP 110/010-K operating over -40°C to +85°C (humidity sealed) and the 800MHz VP 110/010-E operating over -25°C to +70°C. The VP 110/01x, the commercial version, uses either the 933MHz or 800MHz processor operating over 0°C to +55°C. As well as front I/O, the PMC rear I/O signals, from both PMC sites, are routed to P2 and P0. An on-board expansion connector supports an optional dual PMC carrier board, giving four PMC sites in two slots.
VP 110/01x Dual PMC: (from Concurrent Technologies)
VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.

VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: VME: 1.2GHz or 800MHz Pentium III with EIDE, 2 x Ethernet, 2 x PMC, Graphics, 2 x COM, up to 1 Gbyte DRAM, keyboard & mouse interface, USB. Expansion to four PMC. Extended temperature version available.
VP 305/011-E Extended Temperature VME sbc: (from Concurrent Technologies)
The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.

VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The VP 305/011-E supports the 1.1 GHz Intel® Pentium M processor, with up to 1.5 Gbytes DDR ECC SDRAM, operating over a -25°C to +70°C temperature range. With one to three PMC sites, all with rear I/O, the VP 305/011-E rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64x Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet.
VP 305/01x VME High Performance Pentium M: (from Concurrent Technologies)
The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.

VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The VP 305/01x, a single slot board, supports either the 1.6GHz or 1.1GHz Intel® Pentium M processor and up to 1.5 Gbytes 200MHz DDR ECC SDRAM. To give better I/O performance, and for lower power consumption, Concurrent Technologies chose the ServerWorks™ GC-LE chipset. With one to three PMC sites, all with rear I/O, the VP 305/01x rear I/O functions include dual Gigabit Ethernet, VITA 31.1 (Gigabit Ethernet on VME64 Backplanes), analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC, analog graphics, keyboard and mouse interfaces and includes additional front panel interfaces (separate from the rear I/O) for USB, RS232/422/485 and Fast Ethernet.
VP 307/01x - 1.8 GHz Single-Slot VME Board: (from Concurrent Technologies)
The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.

VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The VP 307/01x – featuring the newly announced low power 1.8 GHz Intel® Pentium® M processor 745 (formerly codenamed Dothan). This new processor increases the L2 cache size from 1 Mbyte to 2 Mbytes and has an improved performance versus power dissipation ratio. The VP 307/01x, a single slot SBC, supports up to 1.5 Gbytes DDR ECC SDRAM. With an onboard PMC site, and expansion for two more PMC sites (all with rear I/O) the VP 307/01x rear I/O functions include dual Gigabit Ethernet, optional VITA 31.1, analog/digital graphics, keyboard, mouse, RS232/422/485, USB, floppy and EIDE interfaces. The front panel supports the PMC and analog/digital graphics, keyboard, mouse interfaces including additional front panel interfaces for USB, RS232/422/485 and Fast Ethernet. The VP 307/01x is a form, fit and function addition to the VP 305/01x family.
VP 315/02x Intel Pentium M Processor VME SBC: (from Concurrent Technologies)
The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.

VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: The VP 315/02x supports either the 1.6GHz or 1.1GHz processor (1 Mbyte L2 cache) and the VP 317/02x supports the 1.8GHz processor (2 Mbytes L2 cache). All boards support up to 1Gbyte of soldered 266 MHz DDR ECC DRAM utilizing the Intel® 855GME chipset. With two 66MHz PMC sites, suitable for a wide range of PMC modules, the board also includes extensive I/O functionality and can support VITA 31.1. Commercial, extended and rugged versions are available for applications such as defense, industrial control and transportation systems. A range of operating system board support packages is also available.
Specific boards are available in up to three operating temperatures: 0°C to +55°C, -25°C to +70°C, or -40°C to +85°C. A rugged, conduction cooled version is planned.
VP 683/101: (from Concurrent Technologies)
VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: VME64 : 33MHz Motorola 68040, single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.
VP 683/102: (from Concurrent Technologies)
VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.

VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: VME64 : 60MHz Motorola 68060 (superscalar architecture and branch prediction cache), single VME slot, QSPAN II PCI bridge, up to 512 Mbytes SDRAM, 10BaseT/100BaseTx Ethernet, 16 Mbytes Boot Flash, two serial channels, six timers, parallel port, RTC, dual PMC sites. Options for conformal coating and extended temperature.
VP 741/10x: (from Concurrent Technologies)
PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM

VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: PowerPC (VME64): 500MHz MPC7410 with 2 PMC Sites, Ethernet, 2 x COM, up to 1 Gbyte DRAM, 16Mbytes Flash EPROM
VP 742/20x Motorola PowerPC VME SBC: (from Concurrent Technologies)
This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.: This single slot board is designed around the Motorola® MPC7455 PowerPC® “G4” processor with speed options of 800 MHz or 1 GHz and up to 1.25 Gbytes 266MHz DDR SDRAM (with ECC). The VP 742/20x is designed to meet the explicit needs of high-end performance processing in the VME real-time single board computer market and includes onboard I/O interfaces for a PMC site, Ultra-160 SCSI, dual Gigabit Ethernet, graphics, keyboard and mouse. Vertical markets include military, aerospace, scientific and telecommunications industries. For harsher applications the 800MHz VP 742/201-E operates at -25°C to +70°C. The VP 742/20x supports a 64-bit 66MHz PMC site with front panel I/O (rear I/O via optional P0) and features a USB port, two asynchronous/synchronous RS232/RS422/RS485 serial ports, four 32-bit general-purpose timers, a 32-bit CPU decrementer and 64-bit CPU time base, real-time calendar clock and the Tundra® Universe™ II VME interface. An optional P2 or P2/P0 breakout is available.